How to Clean Dyson Vacuum
Dyson wired or wireless vacuum filters are designed to capture microscopic particles. These particles can build up over time and cause a decrease in performance. You can maintain suction power by washing it at least once per month.
How to Clean Dyson Filter
For cleaning your dyson vacuum cleaner filter you should need to follow the steps which are mentioned below. This will help you in clearing the filter efficiently without causing any damage.
- Your filters should be removed from your Dyson machine.
- To remove any dust or dirt, tap the filters lightly in the sink or bin.
- Use cold water to wash your filter. Gently rub it with your fingers.
- Don’t use detergents.
- Warm tap water can be used to fill your filters. To remove dirt, cover the filter with your hands. Carry on this process so how all the water is gone. Then, shake the filter vigorously to get rid of any excess water.
- After washing the filters, dry them in an area that has plenty of airflow. You must dry your filters completely before you return it to the machine. Otherwise, it may cause damage to the vacuum motor. Before you reinstall the filter, make sure that it is dry.
- Do not dry your clothes in the microwave, tumble dryer or next to a naked flame.
How To Replace a Dyson Vacuum Filter
Sometimes you need to replace the filter because some filters can be cleaned or washed efficiently. So they stop working properly and do not give you proper results. To keep this thing in this section I will guide you on how you can change the vacuum filter for the different dyson vacuum machines.
Dyson Vacuum Cleaner
- Your Dyson should be turned off
- You can simply pull out the filter, which is located at the top end of the canister.
- Replace the filter with a clean or new one.
Dyson Upright Animal Vacuum Cleaner
- Turn off your Dyson vacuum cleaner, and unplug the Dyson from the switch.
- Take the canister out of the vacuum
- Take the handle marked “filter” off the canister and remove the filter.
- Snap the filter back in place by replacing it.
- The second vacuum filter you will find in the ball
- Rotate the wheel to unscrew the ball
- Rotate the vacuum filter attachment so that it releases
- Rotate the filter until it snaps in place.
Dyson Canister Vacuum
- Remove the cylinder from your Dyson vacuum cleaner
- Take the filter out from the cylinder
- Change the filter
- Attach the cylinder to your Dyson.
- The second filter will locate in the ball of your vacuum machine.
- Turn the ball lock clockwise to release it
- Keep the tabs open until the filter appears.
- Reattach the filter to the housing and replace it. It will snap back into place.
- Secure the ball by screwing it back on. Rotate the ball clockwise until it is secured.
Dyson Vacuum Clean and Replacement Parts
There are many parts to your Dyson vacuum cleaner that you need to clean and maintain in order to keep it running at its best. Sometimes, you may need to replace the parts of the vacuum cleaner. Let’s discuss how to change the parts of your dyson.
- Turn off your machine and then disconnect it from the wall socket.
- Take out the Dyson Vacuum Part. To find out how to remove the Dyson Vacuum part, select your machine using the selector.
- Use cold water to wash the parts. Do not use detergent, wash in a dishwasher, or machine that uses washing machines. Then rinse the part under running water and then squeeze the water out gently. Continue this process until you are satisfied.
- The parts should be dried. You can dry them by storing them in a warm area for 24 hours until they are completely dry.
- Sometimes the part is not washable and must be replaced with a new one. You need to ensure that you keep water out of the parts and replace them as soon as possible.
Dyson Quick-Release Motorhead Cleaner for Dyson V8 Vacuums
$84.98 in stock
1 used from $84.13
- Quick-release Motorhead
- Compatible only with these machines : Dyson V8 Absolute, Dyson V8 Absolute Pro, Dyson V8 Absolute Exclusive, Dyson V8 Animal, Dyson V8 Animal, Dyson V8 Total Clean, Dyson V8 Absolute Pro, Dyson V8 Animal, Dyson V8 Total Clean
Dyson V10 V12 Cyclone Cordless Vacuum Cleaner Direct Drive Cleaner Head Turbine Floor Tool
$88.95 in stock
2 used from $88.06
- Genuine Dyson cordless cyclone vacuum cleaner direct drive cleaner head.
- Genuine Dyson part - 967483-04.
- Replacement motorhead cleaner head brush turbine tool.
- Fits the following models - V10 Cyclone series, V10 Absolute, V10 Animal, V10 Total Clean, SV12 series.
Dyson Inc. 967040-01 Brushroll, Purple/Red Service Assy DC65/DC66/UP13
- Compatible with DC65, DC66 and UP13 model vacuums
- 967040-01The Country of Origin of the product is China
- The Brand name of the product is: Dyson Inc.
Flexible Extension Hose & Vacuum Attachments - Replacement Parts for Dyson V11 V10 V8 V7 V6 DC74 DC62 DC59 DC44 - Vacuum Cleaner Accessories Dusty Brush
- HouseHold Cleaning Tool Kit: high quality replacement parts, this tool kit includes 1*Combination tool, 1* Soft hair brush, 1* Stiff bristle tool, 1* Flat seam nozzle, 1* Mattress brush,1*V7, 8,10 adapter,1* Universal adapter, 1* Dyson hose attachment. NOT COMPATIBLE with POWERED or MOTORIZED TOOLs.
- Wide Compatibility: Replacement Attachments Kit perfectly Compatible with Dyson V6 DC30 DC31 DC34 DC35 DC39 DC41 DC44 DC45 DC52 DC58 DC59 DC61 DC62 DC63 DC74 Vacuum Cleaners. Using Dyson V8 adapter (include this set) to connect these attachments to Dyson V11 V10 V8 V7
- Dyson Adapter Kit: This dust cleaning tool kit includes 2 adapters for Dyson V11 V10 V7 and 32mm general attachments. Please check image how to use these adapters in the listing
- Better Extension Hose:The Dyson extension hose can connect directly to Dyson V6 DC59 DC44. Using Dyson V7 adapter to connect this extension hose to Dyson V11 V10 V7. It's soft and flexible,not a wand and extend up to 59 inches to reach more area, perfect tool for clean your car such as between/under the seats, dashboard, air vents. NOT COMPATIBLE with POWERED or MOTORIZED TOOLs.
- 100% SATISFACTION GUARANTEE: If the attachments do not fit you hand vac, please contact us to resolve this issue. If you don’t find our vacuum attachments are helpful, please contact us for refund. Your satisfaction is guaranteed by our warranty policies!
Dyson Bin Assembly / Dirt Cup compatible with DC58, DC61, DC59, DC62, SV03, HH08 and SV07 model vacuums – various V6 Dyson models
$27.28 in stock
1 used from $33.99
- This part is compatible with DC58/DC61 models, DC59/DC62/SV03 models, HH08 models, and SV07 models. It is Dyson OEM part number 965660-01.
- This part does NOT fit the Dyson V7 or V7 Animal.
- Please make sure to check and confirm you have the correct model number or the correct replacement part number since this Bin Assembly/Dirt Cup does NOT fit all Dyson vacuums.
- Vacuum Models and Names that this part fits: DC58 and DC61 are V6 Trigger Handheld Vacuums, DC59 and DC62 are V6 Cordless Stick Vacuums, SV03 is a V6 Cordless Stick Vacuum, SV07 is a V6 Cordless HEPA Stick Vacuum, and HH08 is a V6 Handheld Mattress Vacuum
- Warning: When using this product on your Dyson vacuum, make sure to only open the latch using the bin push rod mechanism – do NOT try to open by hand since this may cause the latch to break or the bin to not stay closed properly.
pildres Dyson Stretch Hose Assembly Designed to Fit Dyson DC40 DC41 DC65 UP13 UP14 UP20 Models Upright Vacuum Cleaner
- SPECIAL DESIGNED HOSE FOR - DC40, DC41, DC65, UP13, UP14, UP20,
- Fits the following model numbers, DC40 & DC41 & DC65, -DC40 Animal, DC40 Animal Complete, DC40 Animal Exclusive, DC40 Multi-floor, DC40 Multi-floor Complete -DC41 Animal Limited Edition, DC41i, -DC65 Animal, DC65 Multi Floor, DC65 Animal Complete, DC65 Ball Multifloor, & UP13 & UP14 UP20 Ball Animal 2
- Alternative to part number - 920765-03 920765-04
- Color - Grey Red
- Premium quality replacement main suction hose Attachment
Dyson DC25 Vacuum Cleaner Head Assembly 91549901 915499-01
$60.00 in stock
- Genuine replacement cleaner head assembly for your Dyson vacuum cleaner.
- THIS IS A GENUINE DYSON PRODUCT.
- See below / click on technical details for a full list of models this is suitable for.
- Genuine part - buy with confidence
Dyson Quick Release Black Replacement Wand | Part No. 967477-09 | Compatible V7, V8, V10, V11 Cordless Stick Vacuums |
$39.99 in stock
2 used from $39.00
- HIGH QUALITY QUICK RELEASE WAND – This Genuine Dyson Quick Release Wand (Black), Part No. 967477-09, is the perfect replacement wand for your Dyson Vacuum. Designed for use with V7, V8,V10 and V11 cordless stick vacuums
- EASY INSTALLATION – With the Dyson quick release wand installation is a breeze. Start cleaning your house in a matter of minutes!
- SLEEK AND STYLISH RED – Who says cleaning can’t be stylish? With this attractive red Quick Release Wand vacuuming will become your new favorite household chore.
- GET THOSE HARD TO REACH PLACES – With the Dyson Quick Release Wand’s long design you no longer need to stress over those hard-to-reach places.
- RELIABLE DYSON BRAND – A Well-Known brand that shows results, Dyson vacuum cleaner systems are trusted the world over for their innovative design and keeping the entire home clean.
Dyson Cyclone Assembly, Purple Dc41
1 used from $75.99
- This is a Genuine Dyson OEM replacement cyclone assembly that's compatible with the DC41 Animal model only!
- This is OEM part number 923597-01. Make sure to check you model number to make sure you have the DC41 Animal Vacuum that this fits!
First4spares Vacuum Cleaner Cyclone Assembly Red Canister Button Release Catch Clips for Dyson DC41, DC43
$9.99 in stock
- First4spares Vacuum Cleaner Cyclone Assembly Red Canister Button Release Catch Clips for Dyson DC41, DC43
Replacement V10 Filters for Dyson V10 Cyclone Series, V10 Absolute, V10 Animal, V10 Total Clean, SV12, Replace Part No. 969082-01, 3 Pack Filters and 1 Clean Brush
$19.96 in stock
- Working Great– the Replacement Part V10 Filters compatible with Dyson V10 Cyclone series, V10 Absolute, V10 Animal, V10 Total Clean, SV12. Compare to Part # 969082-01. The filter can help your vacuums run at peak again.
- 3 Pack Design - 3 pcs filters plus with 1 brush in one set help your always have one filter ready to be used. Just say goodbye to the days of worrying about the lack of additional filters to replace.
- Upgraded Filtering Capabilities – Adopting two-in-one design, our v10 filter help your vacuum run at peak again.
- Quality Above All Else – Made of latest high-strength materials, the V10 filter is designed to outlast.
- Easy to Install – Free your hands from the complicated replacement steps. No extra tools needed. To ensure your vacuum works properly and optimally, it is recommend to replace the V10 filter every 3-6 months depending on your usage.
Dyson Handle, Cyclone Dc65
$15.95 in stock
1 used from $14.49
- This is an O.E.M. authorized part
- Fits various Dyson models
- OEM Part Number 966060-01
- This is a Bissell replacement part
- Part Number 966060-01
ilovelife Electric Mop Head Attachment for Dyson V7 V8 V10 V11 Wireless Vacuum Cleaner Wet & Dry Mop Cleaning Head Floor Brush Replacement Parts
- SUPER COMPATIBILITY - This Mop cleaner head is perfectly compatible with Dyson vacuum cleaner V7 V8 V10 and V11 models. Also, It combines vacuuming and mopping to quickly clean daily messes.**Attention: Do not absorb water directly, or use it on the ground where there is a lot of water**
- POWERFUL SPIN - This vacuum cleaner head with a powerful floor cleaner with a dual-motor rotation speed of up to 160r/Min, It can quickly remove stubborn stains, dust and stains on The floor of house and kitchens.
- SAVING YOUR TIME - The soft roller attachment with powerful motor drive makes home cleaning more time-saving and labor-saving, suitable for a variety of floors such as ceramic tiles, marble, and wooden floors.
- EASY TO INSTALL - This floor attachment is very easy to install, 4 microfiber and reusable replacement mop pads are provided for scrubbing and waxing.
- WARRANTY - Provides lifetime warranty and friendly after-sale service,makes sure the risk-free shopping experience for you. Attention: Do not absorb water directly, or use it on the ground where there is a lot of water.
Dyson Replacement or Additional Click-in Battery for V11 Cordless Stick Vacuums, Part No. 970425-01
1 used from $179.00
- SPECIALLY DESIGNED FOR YOUR VACUUM – This replacement or additional click-in battery is ONLY compatible with the latest (Spring 2020) Dyson V11 Outsize, Torque Drive and Animal cordless stick vacuums.
- DYSON V11 STICK VACUUM 2020 – If you purchased a Dyson stick vacuum, even a V11, prior to 2020 the new click-in batteries ARE NOT COMPATIBLE. Please compare to the picture herein and verify prior to purchase.
- START CLEANING IN NO TIME – This replacement or additional click-in battery for V11 cordless stick vacuums is everything you need to jump right into making your environment spotless.
- NO MORE CORDS– Say goodbye to those annoying vacuum cords. This genuine Dyson battery changes your attitude towards vacuuming.
- RELIABLE DYSON BRAND – A Well-Known brand that shows results. Dyson vacuum cleaner systems are trusted to keep the entire home clean.
Dyson Clip, Swivel Connector Dc41, Red
- This is an O.E.M. authorized part
- Fits various Dyson models
- OEM Part Number 920750-01
- This is a Bissell replacement part
- Part Number 920750-01
Genuine Dyson DC24 Cleaner Head Assembly
- Replacement DC24 cleanerhead assembly.
- Part No.915936-11
Dyson Replacement Bin Vacuum cleaner, Part No. 969509-01, Designed for V10 Animal and Absolute Models
$64.99 in stock
5 used from $53.42
- Original Dyson Replacement Bin
- Works with: Dyson V10 Total Clean, Dyson V10 Absolute, Dyson V10 Animal
- Also works with: Dyson SV12 Animal, Dyson SV12 Absolute, Dyson SV12 Total Clean
- If you have another V10 model you will want the small bin instead
- Please be sure to know which specific model (e.g., Motorhead, Animal, Absolute) that you have prior to ordering
Dyson Animal, Asthma & Allergy, DC17 Total Clean Suction and Attachment Hose, Replaces Part Numbers 911645-07, 911645-02, 911645-04, and 911645-05. Generic
- Replacement Suction Hose Assembly for Dyson DC17 Bagless Upright Vacuum Cleaners, Replaces Dyson OEM Part 911645-07
- Fully Assembled, Includes Both Hose Cuff Ends
- Works with all DC-17 Upright Models, including: DC17 Animal, DC17 Asthma & Allergy, DC17 Total Clean
- Stretches up to 6 Times it's own length, easily reaching an entire staircase without having to move the vacuum!
- High Quality Aftermarket Part For Dyson Part 911645, 911645-07, 911645-02
Yabelle Upgraded 4.0Ah Replacement for Dyson V6 Battery Dyson SV04 SV09 DC59 DC62 DC61 DC58 Handheld Vacuum Cleaner Dyson Battery
- 【Battery Feature】Lithium-ion Battery | 21.6 Volt | 4000mAh | The function of Dyson V6 battery replacement is same with the original battery. 4000mAh High Capacity provide longer duration than 3.5Ah, bring a new life to your tool.
- 【Compatibility】100% Compatible with V6 DC58 DC59 DC61 DC62 DC72 DC74, Absolute Animal Motorhead Slim, SV03 SV04 SV05 SV06 SV07 SV09 etc. Can be charged with original V6 charger about 3 hours.
- 【Upgraded】Premium battery cells with High Capacity provide more Runtime and Super Suction for your vacuum. Long-lasting performance for cleaning your house fully and efficiently. No memory effect, can be charged or discharged as needed without loss of capacity. Easy to install and fits perfectly.
- 【Safety】Passed CE, FCC, PSE, RoHS Certified. Multiple protections prevent battery from damage and extend battery life.
- 【Warm Tips】30 days money back, 1 year warrenty and 24 hours prompt customer service. Any problems, please feel free to contact us by email and we will reply with help!
Dyson DC41 Cleanerhead Assembly DY-920774-01
2 used from $89.00
- This part is compatible with models including; DC41-2013
- Beater bar 920774-01 rotates to loosen dirt and debris so it's drawn into the vacuum
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Dyson
- This beater bar (part number 920774-01) is for vacuums
- Follow the instructions in your owner's manual when installing this part
Genuine Dyson DC50 Brushroll #964705-01
$27.00 in stock
3 used from $24.84
- Part Number 964705-01. Genuine Dyson Replacement Part
- Here’s a list of the specific models and part numbers that this brushroll is made to fit. Many of our different-sized brushrolls look very similar to each other but are NOT compatible, so please do not order this part without confirming your Dyson model matches with one of the following: DC50 Allergy USA 209456-01; DC50 Animal Exclusive 207568-01, 207567-01, and 24860-01; DC50 Animal USA 24750-01; DC50 Ball Compact US 24858-01; DC50 Exclusive 207508-01 and 207509-01; DC50 Multi Floor Exclusive USA 2000341-01 and 24859-01; DC50 Multi Floor Plus USA 204253-01
- WARNING: Always confirm you have the correct model before purchasing Dyson replacement parts – all Dyson brushrolls look the same! See the last image on this listing for a guide on where to find the model number on your vacuum to make sure you have the DC50
Deep cleaning your dyson vacuum should be done every 3-4 months. It will both increase the life of your Dyson vacuum cleaner, as well as make sure that your carpets and floors is getting properly cleaned. Clogging any part of your cyclone will prevent proper air circulation and reduce the suction power for your flooring.